1300 85 33 21

We are the best in what we do! Call Today

Time Machines by CSS

Time Machines by CSS GPS NTP/PTP Time Server (TM2000A )

The TimeMachines GPS NTP/PTP Network Time Server represents a major step forward in capabilities at a breakthrough price point. It will supply accurate time for all computers and time keeping devices on the network. Supporting both Precision Time Protocol (PTP) and Network Time Protocol (NTP), a Stratum 1 time source can now be available on the local network with no need for an internet connection. The system uses an active GPS antenna to maintain the current time as broadcast by GPS satellites planet wide. In addition, a high stability OCXO reference clock is included that allows the unit to serve time if GPS lock is lost for periods of time. The unit is small and can be placed anywhere within the network layout. The built in high sensitivity GPS receiver is able to lock multiple satellites from within many buildings or from a window location, removing the requirement that outdoor antennas be installed in many applications.

PTP and NTP at a breakthrough price:
Until now, a PTP capable time server started with at $5000 and went up from there. The TM2000A provides both Multicast and Unicast PTP protocols to up to 50+ devices. Its high precision reference clock allows for several hours of GPS signal loss.

Time Server Features and Specifications:

• Receive time information from GPS satellites anywhere on the surface of the earth
• RFC1119/1305 NTP Protocol to serve time (Network Time Protocol)
• RFC1769/2030/4330 SNTP Protocol (Simple Network Time Protocol)
IEEE 1588 2002/2008 PTP Protocol
• Server Time Level: Stratum 1
• NTP Server Time Precision: better than 1mS + network jitter
• PTP Server Time Precision: better than 3uS + network jitter
Holdover time: PTP: 2+ hrs NTP: 24+ hrs or better than 0.1 seconds over a year.
• 10M/100M adaptive network interface
• Unit is capable of serving 135+ NTP synchronisations per second. That provides support for over 120,000+ devices updating every 15 minutes on the network.
• Active Patch GPS antenna included. Magnetic base. Cable: RG174, 5m length, SMA male.
• Power Requirements: 5W at startup and 2.5W continuous at 12V DC.
• Environmental Requirements: Commercial temperature range, 0-70C, 95% humidity non-condensing. Altitude -304m to 18,000m.
• Networking: Static or DHCP IPv4 addressing. Standard browser interface for setup.
• Serial port supports both RS-232C levels and TTL (+3.3V) outputting standard NMEA information strings, as well as the 1PPS signal at TTL levels. TTL signals can be turned off via software control.
• Indications: Power, GPS Signal Lock, and 1PPS indications
• Rear Connections: Power, Cat5 Ethernet, Serial, dual USB, and GPS antenna via SMA connection. Supports +3.3V and 5V active GPS antennas with internal jumper setting.
• Mechanical Dimensions: 127mm x 107mm x 33mm

From (AUD) $1,800.00 ex GST

tm2000a-rear-view

Time Machines by CSS GPS NTP Time Server (TM1000A )

The TM1000A Time Machines GPS NTP Network Time Server is a simple to use GPS based time server that will supply accurate time for all computers and time keeping devices on the network. By placing a time server on the local network, (S)NTP time packets are provided without requiring systems to go to the Internet to get a Stratum 1 time synchronisation. The system uses an active GPS antenna to maintain the current time as broadcast by GPS satellites. With this device installed on your local network, there is no longer the worry that if the Internet connection goes down, time synchronisation is lost across the network..  Supports IPv4 and IPv6.

 

Time Server Features and Specifications:

• Receive time information from GPS satellites anywhere on the surface of the earth
• RFC1119/1305 NTP Protocol to serve time (Network Time Protocol)
• RFC1769/2030/4330 SNTP Protocol (Simple Network Time Protocol)
• Server Time Level: Stratum 1
• Server Time Precision: better than 5mS + network jitter.
• All networked computing platforms support time synchronisation either natively or with add on drivers including: Windows, Macintosh, and Linux. Many other devices can access the device as well including VoIP phones and digital clocks.
• 10M/100M adaptive network interface
• Unit is capable of serving 135+ synchronisations per second. That provides support for over 120,000+ devices updating every 15 minutes on the network.
• Active Patch GPS antenna included. Magnetic base with 5 metres of cable.
• Supports IPv4 and IPv6
• Power Requirements: less than 4 Watts continuous.
• Environmental Requirements: Commercial temperature range, 0-70C, 95% humidity non-condensing. Altitude -304m to 18,000m.
• Networking: Static or DHCP IPv4 addressing. Standard browser interface for setup.
• Serial port supports both RS-232C levels and TTL (+3.3V) outputting standard NMEA information strings, as well as the 1PPS signal at TTL levels. TTL signals can be turned off via software
control.
• Indications: Power, GPS Signal Lock, and 1PPS indications
• Rear Connections: Power, Cat5 Ethernet, Serial, and GPS antenna via SMA connection. Supports +3.3V and 5V active GPS antennas with internal jumper setting.
• Mechanical Dimensions: 127mm. x 107mm. x 33mm.

From (AUD) – $650.00 ex GST

tm1000a-gps-antenna