1300 85 33 21

We are the best in what we do! Call Today

Featured Products

Time Machines – Digital and WIFI NTP Clocks








Time Machines – Digital PoE Clocks

6 x 2.5″ Digit PoE From $468.00 ex GST

6 x 4″ High Digit PoE From $585.00 ex GST

Time Machines – WIFI AC Powered Clocks

6 x 2.5″ Digit WIFI From $545.00 ex GST

6 x 4″ High Digit WIFI From $665.00 ex GST

PoE Clocks (Power over Ethernet) –

Searching for a clock that will provide you with correct time down to the second? TimeMachines’ PoE digital clocks will display the precise time once it’s synced up with your network’s time source, be it internet based or local. Using only an Ethernet cable to synchronize and power the clock, you’re able to easily manipulate and control all of your TimeMachines clocks with a single computer on your network and your favorite web browser.

WiFi Clocks –

It can be vital to make sure your workers operate on the same, accurate time throughout your workspace. Wi-Fi clocks by TimeMachines are the best solution for presenting synchronous, precise time across your building. These clocks use Wi-Fi to synchronize their time which means they all display the same time, all the time.

Our Wi-Fi clocks are easy to set up: all you have to do is point the clock at your network time server and sync up. You can also run an Ethernet cable to it as well. Powered by an included 12VDC power supply, you’ll never have to worry about employees operating on the wrong time.

Time Machines digital PoE and WIFI also feature –

  • Available LED colours are RED, GREEN and WHITE (no charge for different colour selection)
  • Web / browser configuration
  • Built in relay to execute an external sounder at scheduled times
  • 18 guage powder coated metal case
  • WIDER digits in the 4″ high digit clocks at 60mm compared to 40 mm wide in other vendors clocks, this enhances distance viewing.
  • Hours, Minutes and Seconds (where a 6 digit clock) are all the SAME size height.

Time Machines Products – NTP Servers


TM1000A NTP Server                                    TM2000A NTP/PTP Server

From $760.00 ex GST             From $1,425.00 ex GST

What’s the difference you ask ?

Time Machine TM1000A – (Download the Brochure)

The TimeMachines TM1000A GPS NTP Network Time Server is a simple to use GPS based time server that supplies accurate time for all computers and time keeping devices on the network. By placing a time server on the local network, (S)NTP time packets are provided without requiring systems to go to the Internet to get a Stratum 1 time synchronization. The TM1000A system uses an active GPS antenna to maintain the current time as broadcast by GPS satellites.

The built in high sensitivity GPS receiver is able to lock multiple satellites from within multiple buildings or from a window location, eliminating the requirement that an outdoor antenna be installed

Time Machine TM2000A – (Download the Brochure)

The TimeMachines TM2000A GPS NTP+PTP Network Time Server represents a major step forward in capabilities at a breakthrough price point. It will supply accurate time for all computers and time keeping devices on the network. Supporting both Precision Time Protocol (PTP) and Network Time Protocol (NTP), a Stratum 1 time source can now be available on the local network with no need for an internet connection.

The TM2000A system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites planet wide. In addition, a high stability OCXO reference clock is included that allows the unit to serve time if GPS lock is lost for periods of time.

DUAL and SINGLE 1RU Rack Mounts are available –

SINGLE Rack mount From $105.00 ex GST – DUAL Rack mount From $125.00 ex GST

TM2000A PTP and NTP at a breakthrough price:

Until now, a PTP capable time server started with at $5000 and went up from there. The TM2000A provides both Multicast and Unicast PTP protocols to up to 50+ devices. Its high precision OCXO reference clock allows for several hours of GPS signal loss. Holdover time: PTP: 2+ hrs NTP: 24+ hrs or better than 0.1 seconds over a year.

** Outdoor antennas are available from TimeMachines including custom length cables and accessories, maximum cable extension is limited to 100 feet / 30 metres without requirement to update to a powered GPS antenna/receiver.

RGB Technology Dot Matrix (IP66) PoE and GPS Clocks

RGB Technology is the leading Polish manufacturer of LED displays. The base of the company and its production plant are situated in Tymień. The company was founded in 2005 as a response to the market demand connected with the development of LED technology for outdoor applications. RGB Technology employs more than 50 people.

These displays are UNIQUE in that by virtue of their IP66 rating they are perfectly suited to outdoor (full exposure to weather), wash down areas etc. NO waterproof enclosures are required.

The dot matrix display while moving away from the common solid 7 segment LED numbers, are perfectly visible in straight sunlight to absolute darkness due to the automatic light sensor selecting a perfect level of brightness allowing absolute visibility at all times.

ZA10-L (4″/100mm 4 RED digit) From $660.00 ex GST

ZB10-L (4″/100mm 6 RED digit) From $779.00 ex GST

ZA20-L (8″/200mm 4 RED digit) From $1096.00 ex GST

ZB20-L (8″/200mm 6 RED digit) From $1,350.00 ex GST

** Includes international freight, based on a SINGLE clock import, prices improve with quantity



Clocks in this series have a built-in executive relay which signalise max 30 alarms. The duration of the alarm may be set individually – from 1 second up to 59 seconds.

– turn on the industrial buzzer signaling such interruptions and changes in the workplace
– turn on school bell
– give a time signal to another device / system



For the purposes where the accuracy of indicated time is critical parameter, the automatic time synchronisation is used – available in two options:


Satellite GPS receiver (for model with suffix „–R” or „–L”)
– provide the synchronisation based on GPS satellite signals
– for proper operation need placement which allow for the “visibility” of the sky
– built-in LED diode indicating receiving signal




Synchronisation via Internet –NTP time servers (models with suffix „–L”)
– provide time synchronisation with dedicated NTP servers (free servers available)
– for proper operation the permanent connection with internet is required
– simultaneous support for ten different time servers ensures correct synchronization of clocks, even in case of loosing communication with most servers
– switching between time servers is automatic after detection of inaccuracies in the action or failure.

Any clock can be a central clock (clock master) and provide a time source for other clocks in the network as a SNTP server. The Central clock may acquire time from the GPS receiver, other public NTP server or your internal clock. This allows for a closed GPS based master/slave time system.

Clock Options

Primex Bluetooth and PoE Analogue and Digital Clock Solutions


With more than 1 million devices installed worldwide, Primex is a leading provider of time synchronisation solutions designed to help facility managers improve productivity, efficiency and accountability.  The company’s newest line of Smart-Sync™ analogue and digital clocks leverages Bluetooth® wireless technology to keep organisations across a wide range of industries running on time, all the time.

Primex Introduces New Range of Smart-Sync™ Bluetooth® Clocks

Smart-Sync™ is a self-organizing, self-forming and self-healing time synchronization clock system from Primex that harnesses the ease, flexibility and low power needs of Bluetooth® wireless technology.

One paired, clocks wake up once daily and dynamically find the strongest path back to the Smart-Sync™ Bridge, resulting in a robust Bluetooth® network of clock-to-clock and clock-to-bridge connections.  The bridge then pushes NTP-acquired time information across the network and all clocks automatically synchronise.

Clocks can be analog, digital or a combination of the two, and battery- and AC-powered options are available.  The system is highly scalable, as well; each bridge can accommodate up to 250 clocks.

Primex PoE Clocks

It’s never been easier to synchronise the time throughout your facility. OneVue Clocks are delivered pre-configured, ready to quickly access your existing network. Simply take the clocks out of the box, connect to PoE power, and hang them on the wall. The clocks will immediately access your network and synchronise perfectly to keep your organisation running on time, even through power outages or Daylight Saving Time shifts

How Primex Bluetooth works –

• Smart-Sync clocks ‘wake up’ once daily
• Clocks synchronise time via Smart-Sync Bridge this is set to refer to your preferred NTP servers via OneVue
• Clocks form a network based on the strongest signal to another clock or the Smart-Sync Bridge
• If one clock fails, other clocks will ‘find their way home’ to the strongest signal
• Smart-Sync Bridge reports clock status to OneVue and reports once daily to those specified
• OneVue accessible is via PC or mobile devices (https://console.primexonevue.com/#/login)

** Clocks require 2 x D cell batteries (Duracell Coppertop are reccomended and supplied) – approximate THREE year battery life, nominal cost to replace.

** A clever security device ‘locks’ clocks to the wall. They can only be removed with a specific knowledge of the required process.

** Bluetooth Bridge numbers vary based on the clock distribution. For example in a single floor senario as long as clocks AND one bridge are within 30 metres of each other (Bluetooth V4 has a theoretical range of 60 metres), ONLY one bridge will be required. For multiple buildings or floors ONE bridge per area is reccommended. ONE network point ONLY per bluetooth bridge.

** VERY simple deployment process, no requirement for power points or network points


From $Ask… ex GST

** Based in Traditional Series (Black Plastic Bezel)


From $Ask… ex GST

** Based in Traditional Series (Black Plastic Bezel)

From $Ask… ex GST


American Time WN56BADD304BP WiFi 5yr Battery NTP 12” and 15″ Analogue Clock

The American Time WiFi 5 Year battery powered NTP clock offers the simplest deployment, NO power and NO network point, options to secure the clock are available as well as FREE clock face logo option to customise clocks with corporate logos.


Clock hour & minute hands:…….. Black
Clock second hand:………………… Red
Clock case:……………………………. Impact-resistant black plastic with built-in hanger
Power:………………………………….. 6 (1.5V) AA Lithium batteries (included)
Battery life:…………………………….. Up to 5 years
Wi-Fi…………………………………….. 802.11b (802.11b/g/n compatible)
Rates Supported: 11, 5.5, 2 and 1 Mbps (CCK/QPSK/BPSK Modulation)
Wireless security using WEP and WPA/WPA2 (AES and TKIP)
Configuration…………………………. Clocks are pre-configured for plug-n-play installation (standard) or individually configured via Wi-Fi client through web page interface. Supports DHCP or static IP addressing.
Rear panel indicator:………………. Red, orange and green LED indicates mode status
Antenna type:………………………… Internal
Time synchronization:………………Average sync time is 2-3 minutes with minimal network traffic (syncs automatically
two times per day). Staggered synchronization for unnoticeable network load with multiple
clocks. Automatically adjusts for Daylight Saving Time changes.
Time accuracy:………………………. ±1 second to SNTP time server. Supports two time servers for redundancy.
Warranty:………………………………. Two Years

** Aluminium Bezel is typically 10% MORE

Price (AUD) FROM $558.31 Ex GST

 Other clock bezel’s available (Mahogany, Light Oak, Aluminium, Steel) –


Other Bezel Options (Steel Added)

Synchronised Time 18″ digit Clock/Count Down & Up Maxi Display

These displays have many applications from general business to schools and sporting arenas. They are completely accurate due to GPS time synchronisation and accurately display current temperature if required. The LED display automatically adjusts it brightness for the ambient light present. This display can Count Down or Up as directed by the long range RF controller

** This display requires 1 x Standard Australian 240 Volt AC Outlet **

** Each number segment is composed of 4 rows of LED lights **

Product Specification:RF Remote Control

  • 6-Digit 7-Segment Numeric, actual digit height is 18 inch or 457.2mm
  • Number Display Format: 88:88:88
  • Housing Dimension: W:1840mm D:100mm H:560mm
  • Application: Outdoor Use
  • Display color: Red, Amber Green
  • Function: count up/down timer
  • GPS control included
  • RF Controller for time adjustment, configuration and Count Down/Up
  • Net Weight 38 kg

General Features:

  • Available in 4 ,5, 6 digits formatSynctimeaus Maxi 18 inch display (temp)
  • Available size from 5 inch to 24 inch in height
  • User can specify Time displays in 12 /or 24 hour format
  • User can specify the temperature displays in Fahrenheit and/or Centigrade
  • LED Viewing Angle: 100°
  • UV Resistant Protective PC material Face
  • Warranty: One-year factory warranty
  • Four signs can be connected together and synchronized.
  • An optical sensor enables the LEDs to automatically dim at dusk and automatically brighten at dawn. The user may specify the dimming percentage.
  • The user may specify the hold time for showing time and temperature from 1-30 seconds for each display screen.
  • Super-bright, daylight-visible LEDs provide over 100,000 hours of continuous operation, significantly outlasting comparable incandescent lamps.
  • The display is energy-efficient and easy to operate, install and service.
  • GPS time and temperature is available.
  • Count up and count down function

Price From $1,729.70 ex GST

Primex Wireless (SNS5X202CF) 2.5′, 6-Digit, Theatre Clock/Timer, Red LED, POE, Flush Mount

Accurate Timing, Better Outcomes – Ideal for Hospital Theatres

Timer Specifications:

  • 12- or 24-hour time display
  • PM indicator light
  • Alternating time and date display option
  • LED dimmer option (75%, 50%, 25%)
  • Power outage memory backup for up to eight hours
  • Operating temperature range: 32°- 95°F (0°- 35°C)
  • Storage temperature range: -20°-185°F (-29°- 85°C)

Network Connectivity:

  • 802.11 b/g Wireless or Ethernet communication
  • Security Encryption: WEP, WPA, WPA2
  • Authentication: LEAP, EAP-FAST, PEAP

PoE Digital Clock Specifications:

  • PoE IEEE 802.3af compliant
  • Certification: FCC/IC/CE marked
  • Actual power consumption: 12 watts (class 3)

Switch Control Specifications:Primex Wireless SNS5X202CF - Timer Control

  • Allows the user to run, hold or reset the timer
  • Designed to fit inside a single gang box (not included)
  • Wall plate cover is stainless steel
  • Cable connectors are standard telephone cable – Cable length: 15’ (4.6m)
  • Optional Dual Timer Switch Control (#Q13678-1) simultaneously activates two connected timers for even more accurate time management

Price From $1,025.00 ex GST

GlobalTime red 4 digit black plastic, single/double sided (GTD368-4SR/DR) PoE Clock

This clock has 100mm high digits and is visible at 30 metres, warranty is 12 months with MTBF of 50,000 hours or in excess of 5 years. Clock configuration is set by a small windows executable either individually or in bulk.

Digit colours available REDGREEN, AMBER, BLUE

  • Time is automatically set by SNTP (Simple Network Time Protocol)
  • Power over Ethernet (POE)- utilizes the same technology as IP phones (AC Adapter available)
  • DHCP or Static IP addressing
  • Display time in 12 or 24 hr format
  • 4 settings for LED brightness (this also provides for reduced power consumption) as well as scheduled settings for display power off/on
  • Firmware update via management software.
  • International time zones, daylight saving time, time server configuration available
  • Certification: CE / FCC /RoHS

PoE technology describes a system to pass electrical power safely, along with data, on the Ethernet cabling. Given a single ethernet cable, a PoE switch provides both data and power, thus eliminating the need for a nearby power outlet.

Dimensions – 302mm × 157mm × 60mm (SINGLE sided), 302mm × 157mm × 80mm (DOUBLE sided)

Weight – 0.7kg Single Sided, 1.2kg Double Sided GTD368-4DR

Price (AUD) FROM $410.00 Ex GST  Single Sided

Price (AUD) FROM $510.00 Ex GST  DOUBLE Sided

GlobalTime GTD366 Time/Calendar/Text PoE Clock

Case: Aluminium
Size: 497(L)*152(H)*50(D) mm
Mounting: Surface
Weight: 2KG
Display: Time 6 DIGIT 2.3’’ digit (56mm) Calendar 8*8 dot matrix (38mm high)

Time is automatically set by SNTP.
Power over Ethernet (PoE).
Display Day by number /Month/Year and day of week for calendar.

Digit and Calendar/Text is available in RED, GREEN, BLUE. ** 12 Month Warranty **

The GlobalTime Time/Calendar clock ALSO supports text and scrolling text below the six digit time.

  • While text is displayed no calendar day will be displayed
  • Text less than 16 characters will not scroll
  • Maximum text is 32 characters
  • Text (where over 16 characters) scrolls from right to left.

Price (AUD) $688.00 Ex GST  Single Sided only

OnTime Flush Mount 4 and 6 RED or GREEN Digit PoE Digital Clock – ONT4FM

Flush Mount3Flush Mount

A separate flush mount model allows you to inset the clock into a wall, creating a more finished look. Inova offers both a 4-digit and 6-digit flush mount model that comes complete with trim in black metal.

Price (AUD) FROM $662.00 Ex GST